TC-300

Description:

The TC-300 Series Combination Service/Dump Body

A Unique "No Compromise" Design

TruckCraft has the answer for users who need one truck to do a combination of many jobs. The TC-300 series carries large payloads and provides secure space for all your tools and equipment too! Built to be the #1 body for contractors, municipalities, utilities, landscapers, and nurseries.

Innovation and Quality

TruckCraft has engineered the body and subframe to handle greater hauling and storage loads. No need to be concerned about bending your truck frame, the "No Compromise" design offers you the greatest capacity on trucks of 10,000# G.V.W. and up, in the industry. The TC-300 series has dump body capacities of 2.75 or 3.0 cu. yds., storage capacities of 55 or 62 cu. ft. of space, and handles 4' x 8' sheets with the tailgate closed. The entire side pack set is built of galvanneal steel for years of rust resistant life. The dump body's electrohydraulic powered 3-stage telescopic hoist uses efficient hydraulic principles for a fast, 25 second raise time. The cylinder operation is smooth and effortless, and allows the bed to be mounted 8- 10" lower than a comparable scissors hoist. A one-hand tailgate unlatch lever, low floor height, built in hand-hold and step bumper all combine to make worker entry to the dump body fast and easy.

Key Benefits:

• Provides all the features of a dump and a utility body
• Available in 8' and 9' models for 1 ton cab chassis
• Premium cabinets provide 62 cu ft of secure storage
• 3.0 cu yd dump capacity - 6.25 cu yd with side boards
• Dumps 6 tons in under 30 seconds
• Ten gauge continuous welded steel construction
• Three-stage, 6 ton capacity telescopic hoist with chromed rod sections
• Complete with electro-hydraulic power unit - No PTO or clutch-pump needed
• Adjustable height ball-pintle mount included
• Double acting tailgate with single handle operation
• Anti-skid step on bumper, and convenient grab-handle make access to dump body safe and easy

General Information

Lubrication fittings are provided at all critical points. The dumper floor is a one piece design and all seams are continuous welded. The body safety prop is controlled with a handle from outboard of the body. A load limiting valve prevents operator from lifting overloads. Standard 18" rear comers with slots allow the addition of side boards for hauling of bulky loads. A back-up alarm and pintle hook provision is included. Body and hoist are factory assembled, except side packs, which are fitted and then removed for shipping -saves you money at mounting time.

Specifications: