|
Manager
Larry Smith
(Sales)
John Diehl
Jeremy Horn
Brad McCumber
|
|
|
Reversible Snow Plow - The Henderson SNOWfoe Series Reversible
Snow Plow is built to last and can handle some of the most demanding
weather conditions. The Reversible plow is offered in lengths of 10’,
11’, and 12’ and heights of 36", 42", and 48". It has a roll-formed
moldboard for smooth snow flow, eight reinforcing ribs for added
rigidity, and a wider push frame for greater stability. Other specs
include twin 3" x 10" double acting cylinders for power reversing,
three-position attack angle adjustment, and plow-mounted cushion valve
as standard equipment. |
= Back To Top =
|
One-Way Snow Plow - The Henderson SNOWfoe Series One-way Plow is
engineered and built for rugged use at high speeds beginning with the
roll formed moldboard that is virtually self-cleaning. The plow is
designed to provide safe tripping action at all speeds and in the most
demanding weather conditions. The plow is available in two cutting path
widths, 9’ and 10’, and varying input and discharge heights. Adjustable
wear shoe and brackets ensure correct push frame support while the
adjustable stabilizing arm has shear pin protection and transfers push
forces to the push frame. All parts are continuously welded and have
electrostatically applied powder coat paint to eliminate corrosion. |
= Back To Top =
|
Mid-Mount Wing - The Henderson SNOWfoe series Mid-Mount Wing is
designed to roll snow and ice to the side while minimizing drift and
improving visibility. The wing is entirely hydraulically operated for
total cab control and has a mechanical float (7") that follows the
contour of the road for a cleaner sweep. The moldboard is available in
three lengths: 6’, 7’, and 8’. All are 27" in height to clear under
mailboxes. The wing can be installed on any truck with at least an 84"
cab-to-axle and tucks up close to the truck body in carry position. |
|
Patrol Wing - The Henderson SNOWfoe series Patrol Wing is an
aggressive adversary to snow and ice. It is available in 8’, 9’, and 10’
lengths. The patrol wing’s 30" moldboard is roll formed with improved
curvature design for better snow moving capabilities. It’s flame cut
ribs are continuous welded to provide a strong, rigid moldboard that
will withstand the elements. The moldboard is tucked up tight and out of
the way when it is not in use. The cab-to-body clearance is not a
consideration so payload is not affected. The patrol wing is designed to
provide a smoother ride and to prolong the moldboard’s life with its
spring-loaded push arm cushions. |
= Back To Top =
|
800-382-0873